Preview in 3D, we print and ship it — or download the file to print yourself.
Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.
A no-drill C-clamp that hooks over the front lip of a K-style rain gutter and carries a security camera or its solar panel on a 13 mm long 1/4-20 slot, so renters and anyone with aluminium soffits never touch the fascia. The 26 mm throat is closed by two M4 screws in 5.5 mm heat-set insert bores (use M4 x 30), gripping lips and beads from 5 to 24 mm deep; overall 74 x 44 mm with a 30 mm wide jaw, and it prints with zero overhangs because the whole profile is extruded along the gutter run.
A split clamp for a 31.8 mm handlebar that carries a second 22.2 mm accessory bar stub 55 mm out to the side, so lights, a GPS, a bell and a phone mount stop fighting for stem space. Closed by two M5 bolts with captured nuts, 99 x 44 x 55 mm, gusseted web under the stub.
A cable-tie-on bottle cage mount for bikes with no braze-on bosses: a 26 x 26 x 90 mm block with a 90-degree V groove that self-centres on round tubes from about 22 to 32 mm, and two M5 cage bolt bores on the standard 64 mm boss spacing with captured 8 mm hex nuts loaded from the side. Two 8 x 2.8 mm tunnels take 4.8 mm standard or 7.6 mm heavy-duty zip ties that wrap the tube and pull the groove down onto it.