Cabinet Pull Drilling Jig
A 178 x 50 x 8 mm drilling jig for cabinet door and drawer pulls, with 5.5 mm drill guide bores laid out symmetrically at 76.2 mm (3 in), 96, 128 and 160 mm hole centers plus a single center bore for knobs. The 6 mm fence rib stands 10 mm proud and registers on the door or drawer edge; the two bore rows put the holes 20 mm or 35 mm from that edge, and a 4 mm centerline trough lets you line the jig up on a pencil mark.
tool jig drill-guide cabinet-hardware