Heads up: kits are AI-designed and haven't been test-built. Parts may not fit together or match your hardware as-is — expect to adjust holes, clearances or dimensions. Print one part and dry-fit it before printing the rest or buying hardware.*
Whole builds, not just parts
Each kit is a complete robotics project: every printed part designed to fit together, the screws and electronics you'll need, assembly steps, and a render of the finished machine. Order the whole kit printed in one click, or download every file at once.
- Parts share one set of dimensions
- Hardware list included
- Add the whole kit to your cart
NEMA17 Rack-and-Pinion Parallel Gripper
A stepper-driven parallel gripper. One NEMA17 pinion drives two opposed racks, and the jaws slide on 8 mm rods with LM8UU bearings. It opens from 4 to 56 mm and mounts to 2020 extrusion.
N20 4WD Skid-Steer Rover Base
A printed 4WD skid-steer rover for four N20 gearmotors, with a 2S 18650 cradle, a raised Raspberry Pi 4 deck and a front bumper with a sensor grid.
SG90 Four-Axis Desktop Robot Arm
A 4-axis desktop robot arm that runs on four SG90 servos. It has a turning base, a shoulder carried on a 625 bearing, an elbow and a geared parallel gripper. There are eight printed parts.
NEMA17 Twin-Motor Strandbeest Walker
A four-legged Theo Jansen walker at 2x scale. Each side has its own NEMA17, so it steers like a tank. It uses M4 pivots and a numbered layer stack so the separately printed links line up.
SG90 18-DOF Hexapod Walker
A six-legged walker with 18 SG90 micro servos, fitted to one set of tolerances: chassis, deck, battery tray and a three-part leg that repeats six times.
N20 Twin-Track Mini Tank Chassis
A skid-steer mini tank with print-in-place 12 mm-pitch tracks built to match its 12-tooth sprockets. Two N20 gearmotors drive it and a 2x18650 deck powers it.