Preview in 3D, we print and ship it — or download the file to print yourself.
Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
A one-piece 100 x 50 x 10 mm caulk finishing and removal tool for re-sealing a tub, shower pan or vanity backsplash: its four working corners are rounded to 5, 8, 12 and 16 mm so each one lays a matching concave silicone fillet while the two adjacent flats ride the walls of the 90° joint. The opposite side carries a 26 mm wide scraper blade tapered to a 1.8 mm plastic-razor edge for lifting old silicone off tile without scratching it, a narrow rake point for digging the joint out, and a 4.5 mm hole for an M4 screw or nail to hang it.
A bolt-clamped replacement slider/holder for a 25 mm shower riser bar, for when the molded plastic holder cracks and the maker only sells the whole $60 rail. A 38 mm split ring with 6.3 mm walls grips the bar via two M5x30 bolts with captured nut pockets, and a 10°-tilted tapered cradle (26.4 mm top, 22.8 mm bottom, open through the bottom so it drains) holds the hand shower. Overall 90 x 39 x 32 mm.
A split collar that clamps onto a standard 1/2" NPT shower arm (21.3 mm OD pipe) with one M4 screw into a heat-set insert, carrying two 30 mm upturned J-hooks for a loofah, razor strap or bottle handle — no suction cups, no drilling tile. Collar bore is 21.8 mm, ring wall 3.5 mm, overall 60 x 38 x 18 mm; slide it on with the shower head removed, then pinch the 3 mm gap closed to lock it.