Preview in 3D, we print and ship it — or download the file to print yourself.
Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
An oversized 78 mm split escutcheon that clamps onto a 1/2 in NPS shower arm (21.3 mm OD) to hide the chipped drywall or tile hole left after an arm swap — the stock 50 mm flange never covers it, and you can't buy a split one without a whole arm kit. It prints as one piece: a 1.2 mm living-hinge ligament at the rim lets the two halves swing open around the arm in place, then one M3x20 screw through the 3.4 mm lug into the 2.6 mm self-tap pilot pulls the 21.8 mm bore tight. 78 mm dia x 16 mm tall, 2.6 mm brim, print in PETG.
A bolt-clamped replacement slider/holder for a 25 mm shower riser bar, for when the molded plastic holder cracks and the maker only sells the whole $60 rail. A 38 mm split ring with 6.3 mm walls grips the bar via two M5x30 bolts with captured nut pockets, and a 10°-tilted tapered cradle (26.4 mm top, 22.8 mm bottom, open through the bottom so it drains) holds the hand shower. Overall 90 x 39 x 32 mm.
A split collar that clamps onto a standard 1/2" NPT shower arm (21.3 mm OD pipe) with one M4 screw into a heat-set insert, carrying two 30 mm upturned J-hooks for a loofah, razor strap or bottle handle — no suction cups, no drilling tile. Collar bore is 21.8 mm, ring wall 3.5 mm, overall 60 x 38 x 18 mm; slide it on with the shower head removed, then pinch the 3 mm gap closed to lock it.