Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Snap-On RJ45 Snagless Boot Four-Pack
Four replacement snagless boots for Ethernet patch cables, joined on a snap-off sprue. Each boot clips onto the cable from the side through a 4.4 mm slit, so you never have to cut the plug off. Each boot has a 6.2 mm bore for Cat5e/Cat6 cable about 5.5–6.5 mm thick. A slit 12.6 x 12.6 mm shroud slides over the back of a standard 11.7 mm-wide 8P8C plug. A 1.8 mm flex tongue covers the latch trigger so it can't snag in a bundle, and you press the tongue to release the plug. The tapered 24 mm tail stops the cable bending sharply at the crimp.
Dual Keystone Surface Mount Box
A printed surface-mount "biscuit" box that holds two standard keystone modules (RJ45, USB, HDMI, F-type) in 14.8 x 16.3 mm snap openings through a 2.0 mm front panel — the 14.5 x 16.0 mm cutout and panel thickness keystone latches are built for. Outer size 72 x 40 x 34 mm, 22 mm port pitch, two 4.5 mm wall-screw bores (M4 or #8 wood screw, 4.2 mm shank) sunk at the back plate behind a 9 mm screwdriver channel, plus 12 x 12 mm cable notches on both long walls and a zip-tie strain-relief slot pair.