Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Upright LiPo Charging Bag Stand
An open-window sleeve that holds a soft fireproof LiPo charging bag upright and open. The bag sits in a 72 x 48 mm well, its mouth folds over the 125 mm high rim, and the balance and charge leads leave through an 18 mm notch at the front. The 120 x 90 mm base has two 4.5 mm holes for #8 or M4 screws, so you can fix it to the bench and stop the bag sagging shut or tipping over while it charges.
Flagged: battery or DC power. Not for safety-critical use without independent engineering review.
JST-XH Balance Lead Parking Tray
This 112 x 90 x 22 mm tray has five lanes for 2S–6S LiPo JST-XH balance leads. The lanes are 16, 18, 20, 22 and 24 mm wide, and raised dots on the floor show the cell count. Each lane has a cross wall with a 2.4 mm slot. The flat lead ribbon drops into the slot, but the plug housing can't pass through it, so plugs stay parked at the back and the leads coil in the 64 mm front bay without tangling or getting crushed.
Flagged: battery or DC power. Not for safety-critical use without independent engineering review.