Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Pi 4 Upright Desk Stand
A stand that holds a Raspberry Pi 4B/3B+ upright on edge. The 100 x 86 mm vented backplate has four 6.5 mm standoffs with 2.9 mm M2.5 clearance holes on the 58 x 49 mm pattern, and the board sits 20 mm above the desk. It prints flat. The 55 mm deep foot has two slotted #8 (4.2 mm) screw holes for fixing it to a shelf or bench. Standing the board vertically frees up desk space and lets air flow past the SoC and through the vent slots.
Pi Zero Vented Wall Tray
This open-front wall tray holds a Raspberry Pi Zero, Zero W or Zero 2 W on its 58 x 23 mm hole pattern. The four 6 mm standoffs have M2.5 clearance holes and head recesses underneath, so the screws sit flush against the wall. The 71 x 36 mm tub has a lowered wall along the port side and notches at both ends so the SD card and camera ribbon stay reachable, a slotted floor for airflow, and two ears with slots for #8 (4.2 mm) wood screws so you can mount the Pi flat to a wall, shelf or cabinet side.