Preview in 3D, we print and ship it — or download the file to print yourself.
Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
A wall bracket that turns a scrap 2x4 into a cantilever lumber-rack arm: the socket takes a nominal 2x4 end (38.1 x 88.9 mm actual) in a 39.2 mm channel, 71 mm deep, with 4.5 mm cheeks that pin the wood with two 5.5 mm cross screws per side. The 8 mm back plate takes four #10 or M5 screws into a stud on a 30 x 48 mm pattern, counterbored 3 mm so the heads clear the lumber. Overall 78 x 48 x 88 mm — print a pair per arm for conduit, moulding, pipe and offcut storage.
A split collar that clamps onto a standard 1/2" NPT shower arm (21.3 mm OD pipe) with one M4 screw into a heat-set insert, carrying two 30 mm upturned J-hooks for a loofah, razor strap or bottle handle — no suction cups, no drilling tile. Collar bore is 21.8 mm, ring wall 3.5 mm, overall 60 x 38 x 18 mm; slide it on with the shower head removed, then pinch the 3 mm gap closed to lock it.
A U-bracket that slips over a cabinet door (fits panels up to 19.5 mm thick) and turns the inside face into a grocery-bag trash caddy — the bag handles drop into a 9 mm trough behind an upturned lip so they can't slide off. 50 mm wide with two optional screw holes for a permanent mount.
A no-screw C-clamp that slides onto a desk edge or shelf and hangs your headphones underneath on a wide 30 mm saddle. The wedged inner jaw self-tightens on tops from 20–30 mm thick, and the 14 mm hook mouth also takes a bag or lanyard.