Preview in 3D, we print and ship it — or download the file to print yourself.
Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
A 144 x 44 x 36 mm wall rack that stores three shampoo, conditioner or body-wash bottles upside down so the product always sits at the cap and the shelf drains dry. Three self-centring funnel slots taper from a 34 mm mouth to a 20 mm throat, catching any bottle neck from roughly 20 to 32 mm under its cap flange; it screws to tile or drywall with two M4 screws or anchors on 104 mm centres, and two gussets carry the load of three full bottles.
A wall bracket that turns a scrap 2x4 into a cantilever lumber-rack arm: the socket takes a nominal 2x4 end (38.1 x 88.9 mm actual) in a 39.2 mm channel, 71 mm deep, with 4.5 mm cheeks that pin the wood with two 5.5 mm cross screws per side. The 8 mm back plate takes four #10 or M5 screws into a stud on a 30 x 48 mm pattern, counterbored 3 mm so the heads clear the lumber. Overall 78 x 48 x 88 mm — print a pair per arm for conduit, moulding, pipe and offcut storage.
A split collar that clamps onto a standard 1/2" NPT shower arm (21.3 mm OD pipe) with one M4 screw into a heat-set insert, carrying two 30 mm upturned J-hooks for a loofah, razor strap or bottle handle — no suction cups, no drilling tile. Collar bore is 21.8 mm, ring wall 3.5 mm, overall 60 x 38 x 18 mm; slide it on with the shower head removed, then pinch the 3 mm gap closed to lock it.