Preview in 3D, we print and ship it — or download the file to print yourself.
Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
A wall bracket that turns a scrap 2x4 into a cantilever lumber-rack arm: the socket takes a nominal 2x4 end (38.1 x 88.9 mm actual) in a 39.2 mm channel, 71 mm deep, with 4.5 mm cheeks that pin the wood with two 5.5 mm cross screws per side. The 8 mm back plate takes four #10 or M5 screws into a stud on a 30 x 48 mm pattern, counterbored 3 mm so the heads clear the lumber. Overall 78 x 48 x 88 mm — print a pair per arm for conduit, moulding, pipe and offcut storage.
A 150 x 78 mm rack that screws to the underside of a cabinet or shelf and hangs two stemmed glasses by their feet. Twin 13 mm slots on a 76 mm pitch take stems from flutes to Bordeaux, flared mouths guide the stem in and snap detents keep glasses from sliding out; four 10 mm standoff posts leave the gap the glass foot slides through, with 4.5 mm screw holes counterbored flush so nothing scratches the foot.
A four-bay bench or wall caddy that stands RC LiPo packs upright, each bay 34 x 28 mm (fits packs up to about 33 x 27 mm in cross-section — the usual 2S/3S 1300–2600 mAh class) with a dedicated 10 mm rear channel per bay so the balance lead drops over a 36 mm divider wall and its plug hangs isolated from the neighbouring pack's main leads. Overall 148 x 47 x 52 mm, with a push-up window under each bay and two M4 clearance holes (4.5 mm) through the 4 mm back wall for wall mounting.
⚠ Flagged: battery or DC power. Not for safety-critical use without independent engineering review.
A tapered 1-cup (240 ml) scoop for dog food, birdseed, coffee beans or detergent, with a flat base so it stands on the counter and a 10 mm hole in the angled handle to hang it on a hook. Bowl is 129 mm long with 2.4 mm walls.
⚠ Flagged: contact with food. Not for safety-critical use without independent engineering review.
A hollow, rib-cored riser that lifts a bed, couch, desk or dresser leg 44 mm for extra under-furniture storage. The chamfered 58 mm socket accepts square or round legs, and a poke-out hole in the floor frees a stuck leg — order four for one piece of furniture.
A screw-on wall gripper whose springy C-jaws snap over a 20–26 mm broom, mop, rake or squeegee handle so it hangs off the floor. 60 mm back plate with two counterbored screw holes; 18 mm tall jaws with a 19 mm snap mouth.
A print-in-place matchbox-style stash box: a fixed outer sleeve with a drawer that slides in and out to store small items like SD cards, paperclips, or jewelry. Prints fully assembled, ~84 x 44 x 22 mm.