Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Tripod Electronics Deck
Part of the 'MG90S Six-Servo Stewart Platform' kit: a 150 mm round tray with a 2.4 mm floor and a 6 mm lip. Three 10 mm legs, 30 mm tall, sit on outboard lobes at 78 mm radius and take M3 heat-set inserts (4.0 mm bore, 6 mm deep), so the hex base plate bolts on top with M3x10 screws. On the floor are a Pi Zero on 58 x 23 mm M2.5 standoffs with loose nut recesses, a 31 x 31 mm M3 driver-board grid with captive nut pockets, a 30 x 12 mm cable slot and a 12 mm notch for the power lead. The flat underside works as the platform's feet.
Walker Center Deck Tray
A 150 x 120 mm electronics deck that hangs between a walker robot's side frames. It has four 37 mm drop tabs with M3 clearance holes (3.4 mm), a 20 mm M3 standoff grid, 22 mm battery-strap slots and two 20 x 12 mm rounded wire pass-throughs, so you can mount controllers, a battery and wiring on one flat tray.