Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
608 Idler Side Upright
A 60 x 90 x 8 mm side upright with a press-fit seat for a 608 bearing (22.05 mm bore, 7.2 mm deep) and an 8 mm tilt axis 70 mm above the base. It holds up one side of a tilt axis, turntable yoke or rover arm. The 70 mm wide gusseted foot bolts down through two M3 clearance holes 40 mm apart.
M8 Rocker Pivot Pillow Block
Pivot block for the 'NEMA17 Rocker-Bogie Mars Rover Chassis' kit (print ×2). It carries the M8x40 rocker pivot bolt in an 8.4 mm teardrop bore 13 mm above the deck. It bolts to the deck grid with four M3x16 screws and hex nuts on a 40 × 20 mm pattern, through a 50 × 34 × 6 mm flange. The 24.5 mm tall rounded upright has two 45° gussets.