Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
118° And 135° Drill Point Grinding Gauge
A flat gauge for checking twist drills while you sharpen them. Lay the shank against the fence and slide it into the V: the right face is set at 59° for a 118° point and the left face at 67.5° for a 135° point. Each face has tick marks every 5 mm for comparing lip lengths. The body is 112 x 50 x 12 mm and takes drills up to about 13 mm, and there is a 5 mm hole for hanging it on a pegboard.
Chisel Honing Guide With 625 Roller
A side-loading honing guide that holds a chisel or plane iron at a repeatable bevel angle on a waterstone or diamond plate: blades up to 52 mm wide and 2–8 mm thick slide into the 9 mm slot and are pinched flat by four M4 screws in heat-set inserts, while a 625 bearing (16 mm OD) rolls on an M5 bolt axle. Overall 66 x 40 x 33.5 mm; blade projection past the front face sets the angle — 38 mm ≈ 25°, 30 mm ≈ 30°, 23 mm ≈ 35°. Printed standing on its back face so every wall is vertical and the clamp beam never delaminates.