608 Bearing Thin Rip Jig
A 150 x 50 x 8 mm table saw thin-rip jig. The stop is a 608 bearing (8 x 22 x 7 mm) on an 8 mm steel pin that sits in an 8.3 mm bore, so the stock rolls past it and doesn't rub or burn. It goes left of the blade so you can cut repeatable strips without trapping the offcut between the blade and fence. Two 5.5 mm slots with 5 mm tick marks bolt it to a hardwood miter-slot runner or T-track using #8, M4 or M5 screws, so it fits whatever slot your saw has.
tool table-saw thin-rip 608-bearing