Brake Line Roller Straightener Block
A five-roller straightening block for 3/16 in (4.76 mm) brake, fuel and copper-nickel line: three 624 bearings on the lower row and two offset above squeeze the tube to a 4.2 mm nip (0.56 mm set) so coiled line pulls through dead straight. 110 x 44 x 18 mm body with V-groove entry and exit guides, 3.4 mm self-tapping holes for M4x16 socket-head screws (the 7 mm head clamps only the bearing's inner race), and four 5.5 mm M5 holes to bolt it to the bench — or grip the 9 mm plate edges in a vise.
garage brake-line automotive 624-bearing
⚠ Flagged: hydraulic brake system. Not for safety-critical use without independent engineering review.