Carriage Clevis Output Tower
This clevis output is part of the 'NEMA17 Leadscrew Push-Pull Actuator' kit. Its 40 x 36 x 5 mm base bolts to the carriage top with four M3x10 screws. They go through 3.4 mm holes on the 20 x 20 mm MGN12H pattern, with 6.5 mm counterbores. Two gusseted ears stand 35 mm tall with an 8.4 mm gap and hold an M3x20 pin and a nyloc 28 mm up, across the actuator axis. The ears are 12 mm wide so that a hex key can reach all four screws.
robotics kit clevis linear-actuator