Four-Reel SMD Tape Wall Rack
A 150 x 32 mm wall plate with four 12.4 mm pegs on 30 mm centres that hang 7 inch (178 mm) SMD component reels by their 13 mm EIA-481 arbor hole, so you can pull tape one-handed at the bench. Pegs stand 36 mm proud on a tapered root and tilt 5 degrees upward so loaded reels stay put and clear the wall; four 4.5 mm holes take M4 or #8 wood screws, and a 10 x 3 mm slot under each peg pinches the tape end so the reel can't unwind.
electronics smd reel storage