Glass Shelf Wall Clamp Bracket
A wall bracket that clamps a glass shelf (6–8 mm) over a bathroom sink. The jaw is 8.6 mm high, so it takes 8 mm glass on its own or 6 mm glass with a 2 mm rubber pad. An M4 thumb screw in a brass heat-set insert (5.5 mm bore) locks the glass in place. Two counterbored 4.8 mm holes take #8 screws at the top of the 30 mm wide × 62 mm tall plate, and the tapered lower jaw reaches 48 mm under the glass. It prints on its side, so the shelf load runs along the layers rather than across them.
bathroom glass-shelf bracket heat-set-insert