Glovebox Hinge Rebush Kit For 5 mm Pin
A sprue-frame kit for fixing sagging glovebox and console lids. You drill each worn, oval pivot hole out to a round 10 mm and press in a flanged bushing (9.8 mm body, crush ribs to 10.4 mm, 14 mm flange). A 5 mm steel rod then serves as the new hinge pin, in a 5.3 mm slip-fit bore, and two push-on collars hold the rod in place. The kit is four bushings and two collars on a 109 x 24 mm frame.
garage car-repair glovebox bushing