MC4 Solar Cable Roof Entry Hood
A low-profile 96 x 70 x 31.5 mm gable hood that takes two solar panel cables (5–8 mm OD, e.g. 4/6 mm² MC4 leads) horizontally through teardrop bores and drops them down a 28 mm roof penetration, so the entry faces sideways and never sits over an open hole. Bolts down with four M4 screws (4.5 mm clearance), has a 1.4 mm butyl-tape sealing channel ringing the penetration and four zip-tie strain-relief slots on the flange.
electronics solar mc4 van-conversion