Micro Servo Slot Mount Plate
A 64 x 22 x 5 mm slotted servo carrier used at all four axes of the 'MG90S Animatronic Desk Lamp Robot' kit. It takes an MG90S or SG90 servo through a 22.8 x 12.6 mm window, with M2 screws through the tabs on a 27.8 mm pitch. Two rounded 3.4 mm M3 slots allow ±3 mm of travel on the kit's 44 mm heat-set insert pitch, so you can line up the spline on the joint axis even when a clone servo's tabs are a little off.
robotics kit servo-mount mg90s