Mower Blade Balancer Cone Stand
A bench-top cone balancer for checking a sharpened lawn mower blade: the blade drops over the 53 mm tall tapered cone and the heavy end tips down. The continuous taper runs from 42 mm down to 9 mm diameter so it self-centres any common blade centre hole from 1/2 in (12.7 mm) through 1 in (25.4 mm), and the three-arm foot (88 mm across, 5 mm thick) bolts to the bench with M5 or #10 screws through 5.5 mm holes. Cone is hollow-shelled with an 8 mm vent hole in the centre so it can also drop over a protruding stud.
garage lawnmower blade-balancer sharpening
⚠ Flagged: a sharp edge or blade. Not for safety-critical use without independent engineering review.