Mower Wheel Axle Bushing Set
A snap-apart run of three split flanged sleeve bushings for worn mower, wheelbarrow, snowblower and hand-truck wheels — bores of 13.1, 16.3 and 19.5 mm for 1/2", 5/8" and 3/4" axles (12.7 / 15.88 / 19.05 mm), each 25 mm long with a 2.5 mm thrust flange (25.0 / 28.2 / 31.4 mm flange dia). Bodies are 19.0 / 22.2 / 25.4 mm OD with six crush ribs taking them to 21.0 / 24.2 / 27.4 mm, so one bushing presses into any hub bore across that range; a 2.4 mm axial split lets it spring onto the axle and pinch down into an undersize bore, and two internal grease channels keep it fed. Snip the 1.2 mm webs with side cutters and use the size you need — the whole card is 95 x 31 x 27.5 mm.
garage bushing mower wheelbarrow