Pi 4 Zip-Tie Pipe Saddle Mount
A Raspberry Pi 4 / 3B+ carrier that zip-ties onto any round pipe from 1/2 in EMT (17.9 mm) up to 1 in PVC (33.4 mm). It's for greenhouse, garage-rail or mast sensor nodes where you'd rather not drill. A 90° V-saddle runs the full 90 mm length and is cored into open cells. The M2.5 nuts for the 58 x 49 mm bolt pattern drop into those cells from below, and four tie slots run under the 6 mm standoffs.
electronics raspberry-pi pipe-mount pvc