SG90 Side-Lying Clamp Strap
This inverted-U strap is part of the 'SG90 Sawtooth-Foot Inchworm Crawler' kit. It clamps an SG90 servo lying on its side onto the chassis pedestal, gripping the body so no screws go through the servo's fragile ears. The strap is a 46 x 10 x 4 mm bridge with two 12 mm legs on a 38 mm spacing and a 30 mm inner gap. Each leg has a 3.4 mm hole and a 6.2 mm head pocket open at the end, and takes an M3x16 screw into the pedestal's M3 heat-set inserts.
robotics kit sg90 servo-clamp