Servo Tab Clamp Frame
A 36 x 34 x 6 mm black clamp frame from the 'SG90 Wheeled Serpentine Snake Robot' kit. It holds an SG90 or MG90S servo's mounting tabs down onto the Servo Segment Housing's z=33 seat, and the servo body and output shaft pass through its 23.6 x 13.0 mm opening. Four 3.4 mm holes on a 16 x 22 mm pattern take M3x12 SHCS into the housing's heat-set inserts. The frame clamps the tabs flat, so it works whatever the clone's tab thickness or hole spacing.
robotics kit sg90 servo-mount