Slotted LiDAR Puck Riser Mount
A 112 mm adapter deck that bolts a hobby 2D LiDAR puck (RPLIDAR A1/A2, LD06/LD19 class) to a rover chassis: eight radial 3.6 mm slots accept any 2-, 4- or 8-screw pattern on a 34–64 mm bolt circle, so one plate fits whatever puck you bought. Four integral 18 mm posts raise the scan plane above the deck and land on a 90 mm cross pattern of 3.4 mm M3 clearance holes (at ±45 mm on X and Y); a 26 mm centre bore drops the USB/UART pigtail through, with a pair of zip-tie slots for strain relief. Prints plate-down with no overhangs and flips over to install — use M3 x 25–30 screws down through the ears into the deck.
robotics lidar rplidar ros