Snap-Slot Wire Harness Lacing Comb
A 110 x 50 x 10 mm lacing comb for building neat wiring looms. Wires press sideways through V lead-ins and snap into seats, so you never have to thread them from the end: 12 seats on the top edge are 3.2 mm with a 2.2 mm neck at 8 mm pitch (about 18–22 AWG hookup wire), and 8 seats on the bottom edge are 4.6 mm with a 3.2 mm neck at 11 mm pitch (about 14–16 AWG). There is a 60 x 12 mm finger window in the middle, and two M4 clearance holes let you screw it to a harness board or slide it along the bundle while you zip-tie or lace the wires at even spacing.
electronics wiring-harness lacing-comb cable-management
⚠ Flagged: automotive electrical. Not for safety-critical use without independent engineering review.