Split Loom 45° Branch Y Trough
A screw-down Y fitting for split-loom harnesses. A 26 mm main channel takes the trunk run, and a 20 mm branch at 45° takes the wires that split off, so you don't have to tape two looms together at the junction. Under-floor zip-tie grooves let a tie wrap each loom end even after the part is screwed flat, and three 4.5 mm holes take #8 screws. It's 112 mm long and 22 mm tall.
electronics split-loom wiring-harness automotive
⚠ Flagged: automotive electrical. Not for safety-critical use without independent engineering review.