Three-Lane Cat6 And Coax Raceway Clip
A low-profile clip that screws to a baseboard or stud and holds three network or camera cables side by side. The 8.4 mm lanes on an 11 mm pitch take cables from 5.5 to 8 mm OD, which covers Cat5e, Cat6 and RG6 coax. Each cable snaps in through a 5.2 mm throat with a V lead-in, so you can run a clean line of drops without a full raceway. The clip is 56 x 11.6 x 16 mm. It prints on its end, so there are no overhangs and the snap lips flex along the layers instead of across them. It mounts with two #6/#8 wood screws or M4 screws through 4.5 mm holes on 45 mm centres.
electronics cable-management cat6 coax