Print-ready 3D models

Tower Frame End Plate

Part of the '2020 Gridfinity Drawer Tower' kit: a 198.5 x 141 x 6 mm frame plate that holds four 2020 aluminium extrusion posts. It uses the same part at the base and, flipped, as the top cap. Each post sits in a 20.4 mm U-socket, 20 mm deep and open on the front or back so the drawer fronts can pass. Each socket takes three M5x8 screws into drop-in T-nuts through 5.5 mm holes. Four 4.6 mm holes take #8 wood screws, and the 39.25 mm side bars act as the top drawer's hold-down.