Trailer 4-Flat Plug Frame Holder
A frame-mounted saddle that parks a 4-flat trailer wiring connector pins-down so it drains instead of dragging: 84 x 30 mm base with two 5.5 mm M5 clearance holes on 54 mm centres plus two 4 x 12 mm zip-tie slots so it can strap to a round frame tube instead of being drilled. The 26 mm wide x 20 mm deep U-cradle takes the plug body with two 3.4 mm zip-tie slots across the front for retention, and a 10 mm cable channel with its own tie slot above the cradle acts as the strain relief the factory hanger never had. 66 mm tall, gusseted into the base so the load runs through the ribs, not across layer lines.
outdoor trailer wiring bracket