Preview in 3D, we print and ship it — or download the file to print yourself.
Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.
A vibration-isolating NEMA 17 motor mount: the motor bolts to a floating 46 mm plate (31 mm square M3 pattern, 22.5 mm pilot-boss bore) that is joined to a 76 x 76 mm outer frame only by four Z-shaped flexure beams, so motor buzz never reaches the chassis or the gyro. The frame bolts down with four M3 screws on a 68 mm cross pattern; print it as shown (flat, no supports) and flip it in use so the motor plate floats 6 mm clear of the chassis, leaving room for the motor screw heads.
An L-bracket that mounts a NEMA 17 stepper to 2020 aluminium extrusion: 54 x 40 mm base with two M5 T-nut holes on 20 mm centres, and a 54 x 50 mm vertical face carrying the 31 mm square M3 bolt pattern plus a 22.6 mm pilot bore for the motor's centring boss. Twin 5 mm gussets carry motor torque in the strong XY direction and sit outboard of the bolt heads so a hex driver still reaches all four screws; a pair of 6 x 3 mm slots above the bore takes a cable tie for the motor lead.
A curved clip that wedges onto the rim of a 1-gallon paint can, giving you a clean edge to wipe your brush on and a slot to park it over the paint instead of on the rim. Spans a 50° arc of the can, about 74 mm wide.
A 60 mm one-piece carabiner whose gate is a built-in flexing spring arm — press it inward to hook on, and a capture nose stops it opening under load. Prints flat with no supports, no assembly, and no metal spring; sized for keys, water bottles, and bag straps.
A screw-on wall gripper whose springy C-jaws snap over a 20–26 mm broom, mop, rake or squeegee handle so it hangs off the floor. 60 mm back plate with two counterbored screw holes; 18 mm tall jaws with a 19 mm snap mouth.
A wall or pegboard-mountable rail with eight graduated blind holes (8-16mm) that hold metric sockets by friction, keeping them lined up and visible on a workbench. Overall size 150 x 30 x 14mm with two mounting holes for screws.