Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
10° Splayed Desk Leg Socket For 1 in PVC
A plate that screws under a desktop, shelf board or laptop table and holds a 1 in schedule 40 PVC leg (33.4 mm OD) at a mid-century 10° splay. The socket is 42 mm deep and the bore is 33.8 mm. The 84 x 84 mm plate takes four #10 wood screws (5.5 mm holes), and an M4 self-tap side screw locks the leg in place, so any board plus pipe offcuts makes a sturdy desk.
1/2 in PVC Desk Hutch Post Socket
A two-way socket for building a desk hutch or monitor shelf from 1/2 in schedule 40 PVC pipe (21.3 mm OD). Screw one socket to the desktop and a matching one under the shelf board, then push a cut pipe between them. Each socket has a 25 mm deep slip-fit bore of 21.6 mm and a 56 x 56 mm ribbed pad with four countersunk 4.5 mm holes for #6 or #8 wood screws or M4 bolts. A #6 pilot hole through the side lets you screw the pipe in place.