Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Gridfinity 1x1 Four-Cell Half-Grid Bin
A standard Gridfinity 1x1 bin (41.5 x 41.5 mm, 3 units / 21 mm tall, no stacking lip) split into four 18 x 18 mm cells on a 21 mm half-grid pitch. Each cell has a 45° scoop ramp at the front. It gives desk and bench Gridfinity grids the finer sorting that SMD parts, small screws and connectors need, without moving to a non-standard baseplate.
Stepped Radial Capacitor 12-Cell Sort Tray
A 150 x 105 mm tray with 12 cells in three tiers. Walls stand 22, 32 and 42 mm tall, giving pockets 20, 30 and 40 mm deep, each about 35 x 33 mm. The tall cells hold radial electrolytic caps (5x11 mm up to 13x25 mm), legs and all, which won't fit in shallow resistor trays. Every cell has a 45° scoop ramp at the front so you can slide parts out with a finger, and the vertical step faces on the two back tiers take value labels.
E12 Resistor Twelve-Slot Index Box
A 105 x 55 mm box with 12 slots, one for each E12 value (10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82). Each slot is 7 mm wide and 51 mm deep and holds small poly bags or taped strips of that value, one bag per decade. The front of each slot has 1 to 12 moulded dots, so you can find a value by counting, with no printed labels to smudge or peel. The top slopes from 45 mm at the back to 28 mm at the front, which leaves the bag tops easy to read and grab.
Hex Standoff Length Gauge Rack
A 124 x 28 x 28 mm staircase rack that sorts AND measures female-female hex standoffs: eight columns with pockets at 5, 6, 8, 10, 12, 15, 20 and 25 mm, all pocket floors on one plane so a standoff sitting flush with the rim is that length, proud is longer, sunk is shorter. Front lane bores are 7.0 mm (M2.5/M3 hex at 5.0-5.5 mm across flats, plus round spacers), rear lane 8.6 mm (M4 hex at 7 mm across flats), with 5 mm scale grooves down both sides and two 3.4 mm M3 clearance holes to screw it to a shelf or bench.