Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Snap-Off PC And Console Foot Set
This is a set of four tapered 34 mm feet, 12 mm tall, joined by thin snap-off bridges. They replace the lost feet on PC towers, consoles, amplifiers and project boxes, and lift the case back up off the desk so the vents can breathe. Each foot fastens with an M3 screw through a 3.4 mm clearance hole. The screw head sits in a 6.5 mm counterbore under a 14 mm × 2 mm recess, where you can stick a rubber bumper. The top face is flat, so you can also use VHB tape if there's no screw boss.
Universal Multimeter Tilt Stand With Probe Holsters
A replacement for the snap-off kickstand on a cheap multimeter. The meter sits in a 96 mm wide cradle against a 16 mm front lip and leans back 30° on a gusseted rest, so any meter up to 96 mm wide and about 45 mm thick fits without needing its own dimensions. Two 10.5 mm holsters at the sides hold test probes with grips up to 10 mm across. The stand measures 134 x 104 x 80 mm, and the backrest and floor have cut-out windows to save plastic.