Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Three-Pivot Dehumidifier Float Lever
This replaces the cracked float arm in a dehumidifier bucket. A broken arm stops the unit from running even when it still works. The lever is 162 mm long with a sealed hollow float (40 x 24 x 14 mm, about 13 g of lift). It has three 3.4 mm pivot holes 10 mm apart that take a 3 mm steel pin or an M3 screw, so you can choose the lever ratio, and a 12 mm tall switch flag you can trim to the length you need.
Print-In-Place Recliner Cable Release Lever
This print-in-place universal replacement for a snapped recliner or sofa release handle mounts with three #8 wood screws. The 106 mm lever turns on a hollow 10 mm pivot pin that holds it in place, and the pin has a 5.5 mm bore so you can add an optional M5 bolt for extra strength. The lever pulls the recline cable through a 25 mm arm, about 4:1 leverage. That arm has an 8 mm pocket for the cable's ball or barrel end (up to about 7.5 mm across) and a 3 mm slot for the inner wire. The base has a 7 mm wide cradle for the cable housing and a stop the housing end pushes against, so you don't need the exact branded part.