Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Comb-Slot Movable Divider Bin
A 140 x 92 x 28 mm drop-in parts-bin insert for a tool drawer, tote or case, with a 5.2 mm comb rail down both long walls so the two 86.5 x 23 mm dividers re-key into any of 24 positions — one print covers any mix of screw, nut and connector sizes instead of a fixed compartment layout. Dividers print flat in parking windows in the 2.4 mm floor, and two counterbored pads take M4 screws (4.5 mm clearance bore) to fix the insert down so it stops sliding.
Tilt-Out Wall Parts Bin
A print-in-place tilt-out parts bin: an 87 x 47 x 60 mm wall frame with a 70 x 41 x 50 mm bin hanging on captured 5 mm axles, so the bin self-closes by gravity and tips forward to pour screws or SMD parts into your hand. Mounts with two M4 screws through 4.5 mm holes on 56 mm centres, placed above the bin so a driver still reaches them; prints as one piece with no supports and 0.5 mm clearance on every mating face.