Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Hole-Free PCB Edge Clamp Carrier
A 92 x 54 mm carrier plate that mounts bare PCBs with no mounting holes — the fixed rail and a print-in-place dovetail jaw grip the board edges with 1.2 mm retaining lips, covering board widths from 11 to 65 mm of standard 1.6 mm FR4. The jaw locks with an M3 screw into a heat-set insert (4.0 mm bore) that jacks the dovetail tight, and the plate has four M3 clearance holes plus two zip-tie slots for cable strain relief.
Slide-Jaw PCB Soldering Vise
A print-in-place PCB soldering vise: a 110 x 38 x 8 mm base rail with a captive T-slot jaw that slides along it, holding boards from 15 mm to 79 mm wide in a pair of 2.6 mm edge grooves (sized for 1.6 mm FR4). An M4 self-tapping screw through the sliding jaw jacks against the rail floor to lock it; four 4.5 mm M4 clearance holes bolt the rail to a bench or plate.