Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
RV Cabinet Self-Latching Spring Bolt
A surface-mount latch that prints in place. The bolt is pushed out by a built-in serpentine flexure spring. Its 45° ramped nose rides over a strike and snaps behind it, and a flared thumb tab pulls it back 6.5 mm to open. It replaces cracked RV and camper cabinet snap latches. The 44 x 32 x 18 mm body fixes to the door with two #8 wood screws through 4.5 mm holes, and the bolt sticks out 6 mm past the housing to catch behind a face frame or a screwed-on block.
RV Shower Door Gravity Hook Latch
A print-in-place gravity hook that replaces the webbing strap that usually wears out on RV shower stall doors. The 21 x 28 mm base screws to the jamb with two #6 wood screws (4.0 mm holes, 7.5 mm counterbores). A 6 mm pivot pin carries a 61 mm swing arm with 0.5 mm clearance, and the arm drops over a #8 pan-head screw in the door through its 5 mm notch with a ramped lead-in, so the door stays shut while you drive.
Occupied/Vacant Door Slide Indicator
This print-in-place indicator shows whether a bathroom is occupied, like the ones on aircraft doors. It is sized for RV, campervan, tiny-home and shared-rental bathroom doors. Slide the thumb knob and a red flag moves into the 24 x 11 mm window in the green housing. The housing is 100 x 40 x 5.5 mm and fastens to the door face with two countersunk #6 or #8 wood screws (4.5 mm holes, 86 mm apart). The slider moves 33 mm between the two states and is held in place by the door face once the housing is screwed down.