Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Twin-Slot Eye Tilt Paddle
The U-shaped tilt rocker (96 × 37 × 18 mm, black) for the 'SG90 Animatronic Eye Mechanism' kit. It pivots on the y -45 / z 30 axis between an SG90 horn and an M3x16 idler pivot. Its 3 mm crossbar has two 22 × 4.2 mm rounded slots on a 60 mm pitch that steer the M3x35 eye-stalk screws. The right arm has a flat outer face for the stock SG90 horn (2 servo self-tappers) and a Ø7 hole for screwdriver access. The left arm has a Ø3.4 hole for an M3x16 SHCS, washer and nylock.
Print-In-Place Geared Claw Gripper
A print-in-place two-jaw claw whose jaws carry 16-tooth spur gears that mesh directly, so a single servo pushrod on the M2 lever drives both jaws symmetrically — no pivot screws, no assembly, 0.4 mm clearance on every mating face. Overall 74 x 86 x 9 mm; jaws swing from a 13 mm closed grip to about 45 mm open, and the 70 x 16 mm rear plate mounts on two M3 clearance holes at 50 mm spacing.