Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Rocker Door And Panel Lifter Lever
This foot-operated rocker lever works like a board lifter. Slide its 4 mm tapered tongue under a door or a drywall/plywood sheet, then step on the pedal to raise the load about 14 mm with a roughly 1.8:1 advantage, which leaves both hands free to line up hinge pins or fasten the panel. It is 168 x 42 x 34 mm, has a rounded fulcrum, two lightening windows in the trussed beam, and a 6 mm hang hole. It prints on its side, so the lifting load bends it along the layer lines rather than across them.
Outlet Box Drywall Setback Gauge
A flat 120 x 45 x 6 mm step gauge for setting new-work electrical boxes flush with the finished wall. Three notches set the box's projection past the stud face at exactly 9.5, 12.7 and 15.9 mm (3/8, 1/2 and 5/8 in drywall); dimples next to each notch (1, 2, 3) show which is which. Rest the land on the stud, slide the box forward until its rim touches the back of the notch, then nail it, so you don't end up with recessed boxes that need box extenders.