Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
EMT Tube Fishmouth Coping Marking Sleeves
This twin marking sleeve slides onto 3/4 in EMT (23.4 mm OD) or 1/2 in EMT (17.9 mm OD). Each saddle-cut top edge is the exact fishmouth for a 90° tee into a tube of the same size, so you trace it with a fine marker and grind or file to the line. M4 thumb screws in self-tap bosses hold each sleeve in place while you trace. The part is 70 mm long and 26 mm tall, which solves the problem of hand-laying-out tube copes for EMT carts, racks and canopy frames.
PVC And EMT Pipe Size Slot Gauge
A 110 x 100 x 5 mm gauge plate for sorting offcuts in the bin or checking a fitting in the aisle. It has U-slots for Schedule 40 PVC in 1/2", 3/4" and 1" (21.3, 26.7 and 33.4 mm OD) and EMT conduit in 1/2" and 3/4" (17.9 and 23.4 mm OD), each 0.5 mm over nominal. A row of 3, 4, 5, 6 and 8 mm round-stock and hinge-pin holes runs across the middle. The pipe drops into the smallest slot it fits, and raised-free dimples mark sizes with no text: round dots for PVC, square dots for EMT.