Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Cam-Lock Housing And Bolt Rebore Jig
An L-shaped drilling jig for moving a blown-out flat-pack cam lock to fresh wood on an 18 mm panel. The 8 mm guide plate takes a 15 mm Forstner bit, and the edge fence lines up an 8 mm bit so the bolt hole meets the housing at mid-thickness (9 mm down). It has two stations: the housing centre sits 24 mm or 34 mm in from the panel edge. Overall size is 90 x 58 x 28 mm.
Shelf Pin Hole Size Gauge Paddle
A 110 x 30 mm pocket gauge for older bookcases and cabinets. It has seven chamfered test pegs (4, 5, 6, 6.35 (1/4 in), 7, 8 and 9 mm) that you push into a shelf-pin hole to find its real size. Below them is a matching row of through-holes (printed 0.2 mm over nominal) for checking a spare pin before you buy or print replacements. A V-notch on the edge marks the 1/4 in peg so you can tell it apart from the 6 mm one, and a 6 mm hole lets you hang it on a pegboard.