Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Straddle Cam Lock Desk Repair Bracket
This inside-corner bracket is 80 mm long with 36 mm legs. It repairs flat-pack desk joints where the cam lock has stripped or torn out. A 24 x 14 mm window at the centre fits over the old cam housing and any crumbled chipboard. Four slotted #8 wood-screw holes (4.8 mm wide with 9 mm counterbores) sit 26 mm from the corner so the screws go into undamaged wood, and 6 mm end gussets keep the joint square.
Flat-Pack Desk Anti-Wobble Corner Brace
A 70 x 70 x 36 mm gusseted L-brace that screws into the inside corner where a flat-pack desk top meets its side panel. It stiffens the joint once the cam locks work loose and the desk starts to rack. Each 5 mm leg has two 4.8 x 8 mm slots that take #8 (4.2 mm) or #10 (4.8 mm) pan-head wood screws, so you can line it up without new pilot holes. Use 5/8 in screws in 16–18 mm particleboard.
Stripped Screw Hole Repair Plug Set
A snap-off set of six barbed, split-top plugs that fix stripped wood-screw holes in particleboard cabinet doors, hinges and furniture. You get two of each size: #6 (drill 6 mm, 2.5 mm pilot), #8 (drill 7 mm, 3.2 mm pilot) and #10 (drill 8 mm, 3.8 mm pilot). Each plug is 24 mm long. Drill out the stripped hole, glue the plug in, trim it flush and drive the screw. The screw spreads the slotted top so it grips the wood.