Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Flex-Fin Door Edge Pinch Guard
A C-shaped guard that pushes onto the edge of an interior door. Its hollow 22 mm spacer block hits the jamb before the door can shut, so it can't pinch fingers or slam, and it holds a pet gap open. Four 1.7 mm flex fins inside the 43 mm jaw grip door leaves from 34 to 41 mm thick (1-3/8 in and 1-5/8 in doors) without screws. The part is 54 x 47 x 30 mm.
Light Switch Keep-On Toggle Guard
A screw-on hood that fits over a standard US single-toggle wall plate and keeps the switch from being flipped by accident. Use it on a freezer outlet, sump pump, bath fan or smart-bulb circuit. The 40 x 96 mm base has two slots that fit the plate's 6-32 screw holes at any spacing from 57 to 64 mm (2-3/8 in is the usual 60.3 mm). Fit it with two longer 6-32 screws (about 1 in). The 21 x 35 x 18 mm enclosed hood covers the toggle.
Twin-Horn Blind Cord Safety Cleat
A 80 x 16 x 12 mm twin-horn cleat that screws beside a window frame with two #6 wood screws (4.5 mm clearance holes with counterbored heads), so looped blind and curtain cords can be wound up out of a child's reach. It replaces the small stamped cleats that go missing or snap. Each horn leaves a 6 mm tapered gap for the cord to wrap into.