Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Folding Chair X-Pivot M5 Bushing Kit
Two sets of bushings for rebuilding a worn folding-chair X-pivot with an M5 bolt once the rivet is drilled out to 10 mm. Each set has a flanged head bushing, a flanged bushing with a captured M5 nut (8 mm AF pocket) and a 20 mm spacer washer, all with 5.5 mm bores and 9.8 mm sleeves. The pieces print joined by snap-off tabs.
Bifold Door Bottom Pivot Bracket
Replacement bottom pivot bracket for hollow-core bifold closet doors, where the original steel bracket is lost or bent and the store only sells the whole track kit. A 6.8 mm x 13 mm deep blind socket takes the standard 1/4 in (6.35 mm) spring-loaded bottom pivot pin and sits 20 mm out from the jamb face; the 62 x 38 x 5 mm base screws to the floor through two 4.6 x 18 mm slots (#8 wood screws) for in/out gap adjustment, and the 30 mm jamb tab takes two #10 screws through 5.5 mm holes on 20 mm centres, braced by two gussets.