Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Mid-Span Sagging Shelf Truss Bracket
This truss bracket screws to a stud under the middle of a sagging closet or pantry shelf and lifts the sagging span. The wall leg is 126 mm tall and the arm is 150 mm deep. Two 4.6 mm holes in the wall leg take #8 (4.2 mm) wood screws, and two 4.0 mm holes in the arm take #6 (3.5 mm) screws up into the shelf. A 9 mm bore through the diagonal brace gives a driver a straight path to the upper wall screw. The part prints flat on its side, so the shelf load runs along the layers instead of across them.
Trussed Hanging Planter Wall Arm
A trussed wall arm that sticks out 165 mm and holds hanging planters, wind chimes or lanterns from S-hooks in two 9 mm eyes, one 100 mm out from the wall and one 155 mm out. It prints on its side, so the weight pulls along the layers instead of across them, and it mounts to a stud with two #10 wood screws or M5 bolts through 5.5 mm holes on a 152 mm vertical spacing (part is 12 mm thick, 174 mm tall).