Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Flexure-Jaw Car Vent Clip With M4 Insert
A replacement for the vent-blade clip that snaps on cheap car phone mounts. A 1.6 mm compliant spring jaw with a grip nub pinches vent slats 1–3 mm thick against a ridged rigid tine, and a stop wall caps the jaw's travel at 2 mm so it can't be bent past yield. The 40 x 32 x 22 mm back pad takes an M4 heat-set insert (5.5 mm bore) in the centre plus two M3 clearance holes 28 mm apart, so you can bolt your old holder head back on.
Print-In-Place Tire Tread Depth Gauge
Print-in-place tread depth gauge for car, bike and trailer tires. A 36 mm wide foot rests on the tread blocks and a dovetail probe slides out up to 20 mm, with a 1 mm scale read against the body's back face. An optional M3 self-tap screw (2.6 mm pilot) locks the reading. The body is 80 mm long, with an enclosed roof over the channel so it prints as a single captured slider.